A Otto's company - serving Sunrise Manor, NV

Wayne Dalton Cable & Drum Replacement in Sunrise Manor, NV

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door*On approved credit; ask us about your options

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Wayne Dalton Cable & Drum Replacement: The Sunrise Manor Owner’s Guide

Replacing a cable and drum set on a Wayne Dalton door usually runs $130 to $250 installed in Sunrise Manor, and most jobs can be done the same day you call. The cable carries the door’s weight; the drum is the grooved spool at the top of the shaft that winds that cable up as the door rises. When a cable frays or a drum wears a groove through its lip, the door stops lifting evenly, hangs crooked, or slams down one side. That’s usually how owners find out something’s wrong: the door comes up lopsided, a snap rings out from the shaft, or the opener strains and quits.

Call (888) 274-8795

Which Wayne Dalton Models This Applies To

Wayne Dalton sells two broad families: the TorqueMaster spring system and the more traditional torsion setup with the spring on a shaft above the door. Cable and drum kits differ between them, and that’s the first thing to sort out before anyone quotes you. The TorqueMaster uses a different drum and cable routing than a standard torsion door, so a generic kit from a big-box store often won’t fit. Check the label on the inside of a panel or the door’s model tag; the 8000, 9000, and 9100 series are common around Sunrise Manor, and each uses its own reasonable spec range for cable length and drum diameter.

When we come out, we measure the cable length, drum size, and shaft configuration before ordering. On a Wayne Dalton we lean toward OEM-matched cable and drum sets where we can get them, because the torque ratings and drum grooves are built for that door. A quality aftermarket equivalent works fine when the specs match exactly – but “close enough” here means a door that binds, so we don’t shortcut it. Quick note: Otto’s Garage Door Sunrise Manor is an independent provider, not affiliated with Wayne Dalton. We just know the product well.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Signs Your Wayne Dalton Cable & Drum Replacement Is Failing

Here’s how a bad cable or drum usually shows itself in a Sunrise Manor door:

  • Door hangs crooked – one side climbs while the other lags. That’s a slack or stretched cable that’s no longer carrying its share of the load.
  • A sharp snap or ping – a cable or drum letting go under tension. Don’t run the door after that; stay clear of it.
  • Fraying near the drum – strands broken at the wind-up point, usually from a drum that’s worn its groove. A frayed cable should be replaced, not re-threaded.
  • Grinding or rubbing at the top – the drum scraping as it turns, often a worn bushing or a drum lip cut through by the cable.
  • Door drops hard on one side – the cable’s slipping the drum or the drum’s no longer holding the wind. That’s the sign to stop and call before something else fails.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what cable and drum work runs in Sunrise Manor:

Item Typical Range
Cable repair (one or both cables) $130 – $250
Drum replacement (per drum) quoted with the cable work
Cable + drum set, installed $130 – $250
Related spring work, if needed $180 – $340

The range depends on the door size, whether it’s one cable or both, the drum style your Wayne Dalton uses, and whether the shaft bushings are worn. We quote the job up front on the phone and hold that number at the door; it doesn’t move between the call and the driveway. Parts and labor are itemized so you see what you’re paying for. Every job carries our 90-Day Done Right Promise in writing.

DIY or Call Us?

Here’s the honest split. You can safely look and measure: check the door label, note the drum style, look for fraying at the drum, and see whether the door sits level when it’s up. What you can’t safely do is remove or re-tension the cable and drum. That cable is holding a door that weighs a couple hundred pounds, and it’s under real tension – one slip and the door drops or the cable whips. We don’t hand homeowners step-by-step for that reason. This is where a trained pro with the right tools belongs. If you’re not sure what you’re looking at, call us at (888) 274-8795, and we’ll tell you straight whether it’s a cable-and-drum job or something simpler.

FAQs

Need Garage Door help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (888) 274-8795
Local Service Coverage

Request a Free Estimate in Sunrise Manor

Tell us what you need - Otto's Garage Door Sunrise Manor responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch