Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Parts for Sunrise Manor Homeowners
When a torsion spring snaps at 9 p.m. and your car is sealed in the garage, you don’t need a replacement door. You need the right part, sized correctly, installed by someone who knows what a 200-pound door riding on two springs can do when it’s handled wrong. That’s the whole job here. Our technicians have up to 22 years of experience matching parts to the door that’s actually hanging in your Sunrise Manor garage, whether it’s a builder-grade Clopay on a 1990s tract home near Desert Pines or a heavier custom door out toward the east side. A live person answers the phone around the clock, quotes the job on that call, and holds the number when we get there. Nights and weekends included. Call (888) 274-8795 for a free estimate on garage door parts in Sunrise Manor.

What Our Garage Door Parts Service Includes
Parts fail in a specific order on Vegas-area doors. The heat and the desert dust work on springs, cables, and seals faster than they would back east, so we see the same handful of failures over and over in Sunrise Manor. Here’s what each one means and what we do about it.
Torsion Spring
A torsion spring is the coiled steel bar mounted above the door that does the actual lifting, and it’s the part most likely to fail first. In Sunrise Manor, we regularly see spring failures in late spring and early summer because the dry heat and the daily 100-plus degree swings work the metal harder than a milder climate would. A snapped torsion spring leaves the door dead weight, so we measure the wire gauge, inside diameter, and length of what’s on your door and match a replacement to those exact specs. Springs are dangerous under tension, and we don’t hand a homeowner a winding bar for this one.
Extension Spring
Extension springs run along the sides of the door on older tracks, and they stretch rather than twist. They’re common on the ranch-style homes and older builds scattered through Sunrise Manor, and when one lets go it can whip with real force if it isn’t cabled through the center. We replace them in matched pairs so the door stays balanced, and we check the safety cables while we’re in there. If your door has a single spring that looks stretched longer than the one beside it, that’s a sign the pair is past its service life.
Cables & Drums
Cables spool around the drums at each end of the torsion bar, and a frayed or jumped cable will make the door lift crooked or jam halfway. Sunrise Manor dust and grit work into the drum grooves, and we’ve seen cables wear thin long before the spring gives out. We replace the cable and inspect the drum for wear at the same time, because a new cable on a worn drum just wears out again. If the door hangs low on one side, stop running the opener and call – a jammed cable under load is not something to test yourself.
Rollers & Hinges
Rollers ride inside the track and hinges connect the door panels, and both wear quietly until the door starts rattling and shaking on the way up. The fine grit that blows through the east valley gets into cheap steel rollers and grinds them flat, which is why we lean toward nylon rollers on doors that see a lot of daily use. We check the hinges for wallowed-out holes and replace the ones that let the panel sag. That rattle you hear isn’t normal aging – it’s usually five dollars of parts and fifteen minutes of work.
Weatherstripping
Weatherstripping is the vinyl or rubber seal around the door frame and panel edges that keeps out wind, dust, and heat. In Sunrise Manor it takes a beating from the sun and dries out and cracks faster than homeowners expect, which lets desert dust and hot air straight into the garage. We replace the perimeter seal and check the door for gaps that let in daylight, because if you can see light under the door, the seal is done. It’s a small part that makes a real difference on your summer power bill.
Bottom Seal
The bottom seal is the rubber strip along the very bottom of the door, and it’s the first thing to go on a Vegas door because it sits closest to the hot concrete. A cracked or torn bottom seal lets in water during monsoon season, dust year-round, and pests that would rather be in your garage than the open desert. We match the seal to the door’s bottom profile and set it so the door still seats evenly against the floor. If your garage takes on water during a storm, the bottom seal is usually the reason.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Parts
We work on all the major makes, and we’ve gotten to know where each one wears out. LiftMaster and Chamberlain openers and the doors that pair with them are everywhere in Sunrise Manor, and we know the common failure points on their torsion hardware and the way their newer units talk to their remotes. Genie equipment has its own quirks, especially on older screw-drive openers where the parts wear differently than a belt or chain drive would. Clopay doors show up on a lot of the newer builds east of the valley, and we know their panel profiles and how their bottom seals and hinges hold up in this climate.
None of that means you need a particular brand or a particular dealer. It means when we show up, we’ve probably already seen your model before and know what to check first. Whether you have a LiftMaster, a Chamberlain, a Genie, a Clopay, or any other make, we can help. Call (888) 274-8795 and tell us what the door is doing.
Signs You Need Garage Door Parts Right Now
- A loud bang from the garage, then a door that won’t lift. That’s almost always a broken torsion spring, and the door is now dead weight. Don’t try to force it open – call and we’ll get the right spring out there.
- The door lifts crooked or hangs low on one side. A stretched or jumped cable is the usual cause, and running the opener on it can bend the tracks or damage the panels. Stop using the door until someone looks at it.
- A rattle or shake that wasn’t there a year ago. Worn rollers and loose hinges let the door wobble in the track, and left alone they wear the track and the panels too. It’s a cheap fix that gets expensive when ignored.
- Daylight or water under the door. A cracked bottom seal or perimeter weatherstripping is letting heat, dust, and monsoon rain into your garage. Replacing the seal is quick and saves you on the power bill.
- The opener strains or the door feels heavy by hand. That usually means the springs are losing tension, not that the opener is bad. Replacing the opener without fixing the springs just burns out the new unit.
Our Garage Door Parts Process – Step by Step
- 1
You call, and a live person answers. Not a call center, not a menu. We ask what the door is doing, what it sounds like, and when it started, then quote the job on that call so you know what you’re facing before anyone comes out.
- 2
We diagnose on site before touching anything. We check spring tension, cable wear, drum condition, roller play, and door balance by hand, and we count the cycles left on your springs the way you’d read the tread on a tire. You get a straight answer on what’s worn out and what still has life in it.
- 3
We give you a written, upfront price. The number we quote is the number on the invoice – it doesn’t change between the phone and the driveway. If we find something else while we’re in there, we show you and you decide, no surprise line items.
- 4
We install the right part, sized to your door. Matched spring pairs, new cables with the drums checked, nylon rollers where they make sense, and seals matched to your door’s profile. We test the balance and the travel before we call it done.
- 5
We back it with the 90-Day Done Right Promise. It’s in writing on every invoice. If something isn’t right in ninety days, one call brings us back to make it right – no runaround, no phone tree.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Parts Cost in Sunrise Manor?
Parts pricing depends on what failed and how much of it, but here’s what Sunrise Manor homeowners typically see. A torsion or extension spring replacement runs $180 – $340 depending on the door’s size and whether it’s a single or double. Cable and drum work runs $130 – $250. Roller replacement is $110 – $220, and track realignment is $120 – $240. Weatherstripping and bottom seal work is on the lower end of that range, and a full parts-and-repair call often lands inside the $150 – $600 band you’d expect for the whole job. Pair any repair over $200 with our $40 Off Any Repair Over $200 standing offer, and seniors and veterans get a permanent 10% off, always.

What affects the price: door size, how many parts failed at once, and whether the door needs rebalancing after. You avoid overpaying by getting the written price up front – which we do on every job – and by not letting a small worn part turn into a bent track. Every free estimate includes a full inspection of springs, cables, drums, rollers, and seals, and the price is quoted and agreed before any work starts. Our technicians have up to 22 years of experience, so you’re not paying for guesswork. Call (888) 274-8795 for an exact quote – estimates are free.
Garage Door Parts Near Sunrise Manor – Our Service Area
We take care of doors all across the east valley – Sunrise Manor first, then out to Garage Door Parts in Whitney and Garage Door Parts in Winchester, plus North Las Vegas, Paradise, and Henderson. Emergency calls get a live person around the clock, and routine parts work is usually scheduled within a day or two. If you’re closer to the western side, we cover Las Vegas, Spring Valley, and Enterprise too. Call and we’ll tell you straight when we can be there.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Parts in Sunrise Manor
Garage door parts are the components that make the door move and seal – torsion and extension springs, cables and drums, rollers and hinges, and the weatherstripping and bottom seal around the edges. When one wears out, the door stops working right, and often the fix is a single part rather than a whole new door. We inspect all of them on every visit so you know what’s worn and what still has life. Call (888) 274-8795 and we’ll tell you what’s likely going on.
Most single-part jobs – a spring pair, a cable, rollers, or a bottom seal – are done in about an hour to ninety minutes once we’re on site. Jobs where several parts failed together, or where the door needs rebalancing after, can run a bit longer. We quote the job on the phone and hold that number, so you’re not guessing. Call for a free estimate.
Springs run $180 – $340, cables and drums $130 – $250, rollers $110 – $220, and track work $120 – $240 – with most full calls landing in the $150 – $600 range. The price is quoted and agreed before any work starts, so there’s no surprise when we hand you the invoice. Seniors and veterans get a permanent 10% off. Call (888) 274-8795 for an exact quote – estimates are free.
Yes – we work on LiftMaster, Chamberlain, and Genie equipment, along with Clopay and other major makes, and we know where each one tends to wear out. Whether it’s a spring, a cable, or a roller on a LiftMaster door, we’ve likely seen the model before. Tell us the make when you call and we’ll come prepared. Reach us at (888) 274-8795.
Yes. A live person answers the phone around the clock, including nine at night when a spring lets go and your vehicle is sealed inside. We quote the job on that call so you know what you’re facing, and we get the part sorted as fast as we can. Call (888) 274-8795 any hour.
Every job is backed by our 90-Day Done Right Promise, in writing on the invoice – if it’s not right within ninety days, one call brings us back to make it right. No customer-service queue, no runaround. It’s the same promise on a spring job as on a full repair. Call for the details when you book.
Clear the area around the door and the garage floor so we can work safely, and if you can, park the car outside so the door has room to travel. Don’t try to force a stuck or broken door open by hand – a door with a failed spring is dangerous. Have the make and model of your door or opener handy if you know it. Then just call (888) 274-8795 and we’ll take it from there.
Schedule Your Garage Door Parts Service in Sunrise Manor Today
A worn part turns a working door into a dead one fast, and it’s rarely as expensive as homeowners fear. Call (888) 274-8795 and a live person answers around the clock. We quote the job on the call, hold that price when we show up, and back every job with the 90-Day Done Right Promise – free estimate, no obligation. You’ll see us again at the hardware store, and that’s the point.
Written by the team at Otto’s Garage Door Sunrise Manor.