Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateClopay Torsion Spring Replacement: The Sunrise Manor Owner’s Guide
We replace Clopay torsion springs for Sunrise Manor homeowners, and most jobs run $180 to $340 installed for a single standard spring, with the honest number set by spring size, not by how big the door looks. Spring failures don’t wait for business hours, so we answer the phone around the clock and can usually get out the same day. Most people here find out the bad way: they hit the button, hear a bang from the garage, and the door won’t budge. The opener hums, nothing moves, and their truck is stuck inside. That bang is a spring that just gave out, and it’s the most common call we get in Sunrise Manor.
Which Clopay Models This Applies To
This part matters on any Clopay door built with a torsion system, which means most of their residential lines, from the builder-grade steel models common in Sunrise Manor tract homes up through the premium insulated doors. The torsion spring isn’t made by Clopay anyway; the door makers buy springs from wire suppliers and spec them to a door’s weight. So the replacement isn’t about matching a Clopay logo, it’s about matching the wire size and inside diameter that the original spring was wound to.
Here’s the gotcha most people miss: two Clopay doors that look identical can carry different springs because of glass, insulation, or a heavier panel. Order the wrong wire gauge and the door will either fight the opener or drop too fast. To identify yours, look at the color code painted on the spring coil (Clopay doors often carry a two-color code) and measure the wire in thousandths and the coil length in inches. When that’s unclear, a scale weight on the door settles it.
On the OEM-versus-aftermarket question, we’re straight with you: a quality oil-tempered aftermarket spring from a known wire mill is often as good or better than the original, and we can usually get it faster. On Clopay’s high-cycle or specialty doors, the OEM part is the safer bet. We’re an independent shop, not affiliated with Clopay, so we’ll tell you which way makes sense for your door rather than pushing one.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Signs Your Clopay Torsion Spring Replacement Is Failing
Springs rarely fail without warning. These are the signals we hear about from Sunrise Manor homeowners before the bang:
- A loud bang from the garage. That’s the spring snapping, and the door is now dead weight on the opener. It usually happens in the morning when the door is coldest and the metal is most brittle.
- The door feels bottom-heavy when you lift it by hand. A tired or broken spring can’t carry its share of the weight, so you’re lifting the door, not guiding it.
- The opener strains or the door stalls partway up. If the opener is struggling, the problem is almost never the opener; it’s a spring that’s lost tension and is making the motor do work it wasn’t built for.
- A visible gap in the coil. Look at the spring above the door. If there’s a section of coil separated from the rest, it has broken and no amount of adjustment brings it back.
- The door drifts down a few inches after it closes. That slack is a spring near the end of its life, and it’s worth a look before it lets go.
Replacement Cost & What’s Included
For Sunrise Manor, installing a Clopay-compatible torsion spring runs $180 to $340 for a single spring; a two-spring door, which the heavier Clopay models use, lands at the higher end because there’s twice the parts and twice the winding. Cable replacement, often needed when a spring lets go, is $130 to $250, and general garage door repair in Sunrise Manor is $150 to $600 depending on what else the failure took with it.
The range comes down to spring size, single versus double, and whether the cables or drums were damaged. We quote parts and labor as one number up front, explain what’s included (the springs, the winding, a balance check, and a safety test), and we hold that number when we get there. Springs are mechanical parts and carry no manufacturer’s warranty on their own, but our 90-Day Done Right Promise is in writing on every job; if it’s not right, one call brings us back. Right now you can also take $40 off any repair over $200.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Here’s the honest part. A garage door is 200 pounds riding on two springs, and torsion springs are the most dangerous part on the whole door. Those springs are under serious tension even when the door is closed, and winding or unwinding one is where serious injuries happen. This isn’t a job to learn from a video.
What you can safely do is look and listen: check the spring for a visible gap, note the color code if you can read it, try lifting the door by hand with the opener disconnected to feel its weight, and watch whether it drifts after closing. Tell us what you find when you call. Leave the winding to us; we’d rather you call than get hurt. Reach us any hour at (888) 274-8795, and we’ll quote it right on the call.
FAQs
Expect 7 to 12 years for a standard-cycle spring, less in Sunrise Manor’s dry desert climate, which is hard on the wire over time. A high-cycle spring on a heavier Clopay door can go longer, but the desert heat wears everything faster. If you’re not sure how much life is left, we’ll count the cycles for you when we’re there.
No. A torsion spring is one continuous wound wire, and once it’s cracked or broken there’s no repair, only replacement. We install a fresh spring matched to your door’s weight and check the cables and drums while we’re at it.
A single-spring replacement is usually under an hour; a double-spring door takes a bit longer. Most Sunrise Manor jobs are done the same day you call, and we answer around the clock. Call (888) 274-8795 for an exact quote, which is always free.
We match the spring to your door’s wire size, inside diameter, and length, then source a quality oil-tempered spring or the Clopay OEM part when the door calls for it. We don’t carry parts on a truck or keep a warehouse; we order what your door actually needs. We also service other major brands, including LiftMaster, Chamberlain, and Genie, so if you’ve got a mixed setup we can still help.
Call Otto’s for a Straight Answer
Springs fail on their own schedule, and we’d rather you call than work around a door that’s riding on a tired spring. We’re locally owned and owner-operated, we answer the phone with a live person any hour, we quote before we come, and that number holds when we’re standing in your driveway. No trip charge inside the county, free second opinions on any written estimate, and a standing 10% discount for seniors and veterans. Call (888) 274-8795 for a free estimate and we’ll take care of your Clopay door in Sunrise Manor.
Written by the team at Otto’s Garage Door Sunrise Manor, serving Sunrise Manor and nearby areas.